What You Should Know About Garage Door Spring Replacement

The first thing you should know about Garage Door Spring Replacement is what it entails. These springs are part of the assembly of the garage door and are a necessary part of the whole door’s functioning. The springs are held in place by the cable drum, which is usually made of cast aluminum alloy and measures about 4″ in diameter around its flat portion. The cable runs from the back of the drum, through the door’s track brackets and behind the roller stems.

Typically, garage door springs cost less than $100 each. In some cases, you can even find top-of-the-line springs for less than that. While shopping for springs, take along your old spring and note down the specifications. You should also wear safety glasses and put on gloves. Always remember to carry a ladder when replacing springs. If you’re unsure of the right spring, consult the Better Business Bureau for more information.

The springs of your garage door should be lubricated with WD-40 every now and then. This will prevent rust and dryness, which will lead to quicker spring replacement. You should also use silicone-based lubricant to lubricate the springs yourself. Professional technicians have the necessary tools to tune-up the springs. If your garage door is not opening and closing correctly, you should consider contacting a garage door repair company.

Generally, the torsion spring is the hardest one to replace, as it’s under such high tension. Moreover, it’s dangerous, as it may break and fly around, which can injure you. Even worse, it can damage your vehicle or home. So, most experts recommend hiring a professional for this job. New garage door springs should last from seven to fourteen years. If not, you’ll need to hire a professional to do it for you.

Despite the fact that replacing garage door springs is not an easy task, it’s not impossible to do if you follow a few guidelines. You should purchase the correct lubricants and perform annual maintenance of the springs. If you’re not sure of how to go about it, ask for discounts. You can also ask if the garage door company you’re hiring offers senior discounts or military discounts. Lastly, it’s essential that you keep lubricants and maintenance products on hand in case your garage door springs break.

To replace a broken garage door spring, follow these steps: First, unwind the spring. Get a sturdy ladder and make sure you’re at least two feet tall. Now, insert a bar into the hole in the spring and make a quarter turn to test its force. Next, remove the set screws to unscrew the springs. If there are any, use an open-end wrench or an adjustable wrench to loosen them.

Measure the springs. Some garage door technicians have trouble measuring torsion springs and ordering the wrong type. Purchasing the wrong spring could be a waste of time and money. Remember to read and follow the instructions carefully. Also, never attempt to install torsion springs by yourself – it can cause a lot of damage and be very dangerous. If you have any doubts, call in a professional. You will be glad you did.